EuroFoam
EuroFoam is a spray applied foam insulation, made in Europe and is EU certified. It is an environmentally friendly solution for insulation in your home, which does not emit anything good or bad making it completely safe.
By insulating your home with EuroFoam you can reduce your home heating bills, reduce your Co2 Carbon Footprint, and improve the BER of your home. You are also making your home "airtight" which will prevent infiltration of unwanted cool & hot air from the outside
EuroFoam can be used on residential dwellings, commercial buildings, industrial buildings, & agricultural projects.
By installing EuroFoam in your home you will:
- Increase energy efficiency

- Reduce Co2 emissions
- Save Money
- Improve the BER of your home
- Improve air quality
- Seals and insulates in one application
- Non-Toxic product
- U-Value does not deteriorate over time
By using EuroFoam you are getting a single solution to provide superior insulation, healthy living, with an environmentally friendly product.
EuroFoam provides both open & closed cell foam products, that can be used for the following:
- New Build Timber Frame Houses
- Residential homes
- Industrial buildings
- Commercial Buildings
- Agricultural Projects
- Storage Containers

Pitched Roofs Ceiling Level New Construction
U-Values for tiled or slated pitched roof, ventilated roof space, insulation placed between and over joists at ceiling levels.
Thickness Of Insulation
(mm)
|
U-Value
(W / m2K)
|
150
|
0.26 |
| 200 |
0.20 |
| 250 |
0.16 |
Note: These values are based on the following construction (external to internal)
- Conventional tiled or slated pitched roof
- Ventilated roof space
- Timber ceiling joists at 400mm centres
- Foam insulation (92%) / timber rafters (8%) (insulation and timber depths as indicatd above)
- Vapour check barrier
- Plasterboard 12.5mm
- 3mm gypsum skim coat finish
Pitched Roofs Sloping Level New Construction
U-Values for tiled or slated pitched roof, with 50mm ventilated space over breathable roofing felt, insulation placed against roofing cards between rafters at sloping level.
Thickness of Insulation
(mm)
|
U-Value (W/m2K)
|
150
|
0.27
|
200
|
0.21
|
250
|
0.17
|
Note: These values are based on the following construction (external to internal)
- Conventional tiled or slated pitched roof
- 50mm ventilated space over breathable roofing felt
- Timber ceiling joists at 400mm centres
- Foam insulation (92%) / timber rafters (8%) (insulation and timber depths as indicated above)
- Vapour check barrier
- Plasterboard 12.5mm
- 3mm gypsum skim coat finish
|